{"title":"Indoor Furniture","description":"","products":[{"product_id":"anton-coffee-table-small-set-black-frame-grigio-dekton","title":"Nesting Coffee Table Set Anton – Small Set – Black Frame – Grigio","description":"\u003cp\u003eAnton is a commercial coffee table set of two, built on fully welded frames of raw Swedish steel, powder-coated black, with Grigio Dekton sintered-stone tops. The Small set nests a medium and a small table into a single footprint, and the ultra-compact mineral surface resists scratches, heat and stains.\u003c\/p\u003e\n\u003cp\u003eIn a hotel lobby the pair works as one quiet block that opens up when seating groups fill: the mid-grey Grigio top sits as comfortably on pale stone floors as beside dark upholstery. The tables can nest fully, stand apart or run in an L around a corner sofa. For project orders, any RAL powder-coat colour for the steel frames is available on request, and the Design Your Own configurator covers alternative tops and compositions.\u003c\/p\u003e\n\u003cp\u003eThe frames are welded and powder-coated in by Crea's own factory in Malmö, Sweden, and every table is inspected by hand before it ships. The set is warrantied for ten years, with spare parts available long after purchase and repair favoured over replacement. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212077326702,"sku":"ANTON-GRP-SMALL-SET-BL-DEKGRIGIO-SIMP","price":8796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_coffee_table_front_black_grigio_dekton_samllset_indoor_c7698316-546f-42e9-bcbd-49a0ba8b6406.webp?v=1786544211"},{"product_id":"anton-coffee-table-small-set-black-frame-sabbia-dekton","title":"Nesting Coffee Table Set Anton – Small Set – Black Frame – Sabbia","description":"\u003cp\u003eThe Sabbia version of the Anton Small set is a two-piece commercial coffee table group: warm sand Dekton sintered stone on fully welded black frames of raw Swedish steel. Medium and small nest completely into one footprint, and the sintered-stone surface holds up against everyday scratches, heat and stains.\u003c\/p\u003e\n\u003cp\u003eSabbia's warmth softens steel-framed furniture enough for office lounges and breakout areas that would otherwise read cold, while the square steel profile keeps the set visually consistent with the rest of the Anton series. Nested, separated or arranged in an L, the two tables reconfigure without tools or effort. The frames can be powder-coated in any RAL colour on request for project orders, with further tops and compositions available through Design Your Own.\u003c\/p\u003e\n\u003cp\u003eDesigned by Alexandra Pettersson, every set is welded from raw Swedish steel and finished in by Crea's own factory in Malmö, Sweden, hand-inspected before dispatch, and covered by a ten-year warranty backed by long-term spare-parts supply. Repair is the default rather than replacement. Volume pricing for projects is quoted on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212077359470,"sku":"ANTON-GRP-SMALL-SET-BL-DEKSABBIA-SIMP","price":8796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_coffee_table_front_black_sabbia_dekton_samllset_indoor_8bc1a840-97e9-4399-8bc7-908252b19245.webp?v=1786544213"},{"product_id":"anton-coffee-table-large-set-black-frame-sabbia-dekton","title":"Nesting Coffee Table Set Anton – Large Set – Black Frame – Sabbia","description":"\u003cp\u003eAnton's Large set is a three-piece commercial coffee table group: one large and two medium tables with Sabbia Dekton sintered-stone tops on fully welded black frames of raw Swedish steel. The two mediums are identical, tucking in side by side so the closed set covers about half the floor area it occupies spread out, and the mineral tops resist scratches, heat and stains.\u003c\/p\u003e\n\u003cp\u003eThree tables give a reception or waiting area genuine flexibility: gathered into one warm sand block for quiet hours, spread across seating groups when the space fills, or run in an L around a corner arrangement. The square steel profile ties the set to the wider Anton series across a larger specification. Any RAL powder-coat colour is available on request for project orders, and Design Your Own opens alternative tops and compositions.\u003c\/p\u003e\n\u003cp\u003eby Crea welds, powder-coats and finishes each set in its own factory in Malmö, Sweden, with a hand inspection before every shipment. The warranty runs ten years, spare parts remain available long after purchase, and repair takes precedence over replacement. For project quantities, ask for a quotation.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212077392238,"sku":"ANTON-GRP-LARGE-SET-BL-DEKSABBIA-SIMP","price":15996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton-coffee-table-large-set-black-sabbia-dekton-modern-living-bold-centerpiece_bed953f5-ba7d-4b29-80ee-80e885844cd8.webp?v=1786544208"},{"product_id":"sella-dining-chair-black-frame-jade-black-leather-jade-black-armrest","title":"Dining Chair Sella – Jade Black Leather – Jade Black Armrests","description":"\u003cp\u003eSella is a restaurant chair in Jade Black vegan leather with matching zipped leather covers on the armrests, built on a fully welded steel frame around a floating seat. The frame is certified for intensive commercial use to EN 16139 Level 2, the European standard for heavy contract use, with EN 1022 stability and EN 1728 strength and durability testing, certified by RISE, Sweden. The Valencia vegan leather is rated at 300,000 Martindale, carries the PERMABLOK3 protective finish and meets EN 1021-1, EN 1021-2 and CRIB 5 fire safety requirements, and each seat is rated for a 200 kg load.\u003c\/p\u003e\n\u003cp\u003eThe tone-on-tone specification suits hotel restaurants and dining rooms where guests notice the touch points: the sewn armrest covers zip in place and can be reordered as spare parts, and the fine-grained surface wipes clean with a damp cloth between services. Seat height is matched to standard dining tables of 72 to 76 cm. For project orders, any RAL powder-coat colour and customer's own material upholstery are available on request.\u003c\/p\u003e\n\u003cp\u003eSella is designed by Alexandra Pettersson and welded from raw Swedish steel in by Crea's own factory in Malmö, Sweden. Chairs arrive fully assembled and are covered by a 10-year warranty, with spare parts available long after purchase. This version ships in 1 to 5 days. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather \/ Vegan leather","offer_id":53212082045294,"sku":"SELLA-GRP-BL-LEATHER-JADEBLACK-AR-JADEBLACK-SIMP","price":3916.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/sella-black-frame-jade-black-leather-black-backrest-threequaterview-ecom-1_d92b963d-bff0-420c-9bb9-2b577ce399c6.webp?v=1786544486"},{"product_id":"sella-dining-chair-black-frame-latte-leather-chocolate-armrest","title":"Dining Chair Sella – Latte Leather – Chocolate Armrests","description":"\u003cp\u003eThe Sella restaurant chair in Latte vegan leather with Chocolate armrest covers sets two warm leather tones on a black welded steel frame with a floating seat. RISE, Sweden certifies the frame for intensive commercial use: EN 16139 Level 2 for heavy contract environments, EN 1022 for stability and EN 1728 for strength and durability. Both leathers are Valencia vegan leather at 300,000 Martindale with the PERMABLOK3 finish, fire safety is covered by EN 1021-1, EN 1021-2 and CRIB 5, and the load rating is 200 kg per seat.\u003c\/p\u003e\n\u003cp\u003eThe pale seat and dark armrests give restaurant and café dining rooms a two-tone scheme within a single specification. The sewn covers zip over the steel armrests and can be ordered as spare parts when a refresh is due, and both leathers are cleaned with a damp cloth without special treatment. Seat height suits tables of 72 to 76 cm. Project orders can specify any RAL powder-coat colour for the frame and customer's own material for the upholstery.\u003c\/p\u003e\n\u003cp\u003eDesigned by Alexandra Pettersson, every chair is welded from raw Swedish steel in by Crea's factory in Malmö and delivered fully assembled, backed by a 10-year warranty and long-term spare parts supply. Standard versions ship in 1 to 5 days. Volume pricing for projects is available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather \/ Vegan leather","offer_id":53212082143598,"sku":"SELLA-GRP-BL-LEATHER-LATTE-AR-CHOCOLATE-SIMP","price":3916.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/sella_chair_front_latte_leather_coffee_indoor_eb8b5fad-8fce-4938-8c21-766f382d074c.webp?v=1786544490"},{"product_id":"bella-dining-chair-black-frame-ivory-leather","title":"Dining Chair Bella – Black Frame – Ivory Leather","description":"\u003cp\u003eBella in Ivory vegan leather on a black steel frame is a contract-grade restaurant chair, certified for commercial use to EN 16139 Level 1, EN 1022 stability and EN 1728 durability, tested by RISE in Sweden. The Valencia vegan leather is rated at 300,000 Martindale, around ten times the typical contract specification, carries the PERMABLOK3 protective finish and a 5-year fabric warranty, and meets EN 1021-1, EN 1021-2 and CRIB 5 fire safety standards. The maximum load is 200 kg.\u003c\/p\u003e\n\u003cp\u003eFour free-standing legs with no connecting rails keep the floor clear for cleaning and let staff reset a dining room quickly, and the fine-grained surface wipes clean with a damp cloth. Pale upholstery on a slim black frame suits restaurant dining rooms and hotel restaurants that want visually light seating with full durability, and seat and backrest are padded with cold-cut foam. For project orders, any RAL powder-coat colour for the frame and customer's-own-material upholstery are available on request.\u003c\/p\u003e\n\u003cp\u003eEach chair is fully welded from raw Swedish steel in by Crea's own factory in Malmö, Sweden, arrives assembled and carries a 10-year warranty; this version is stocked and ships in 1 to 5 days. It is sized for standard tables of 72 to 76 cm, spare parts remain available long term, and we quote project quantities on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212082733422,"sku":"BELLA-GRP-BL-LEATHER-IVORY-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/bella-black-frame-ivory-leather-threequaterview-ecom-1_1a459369-60eb-4a07-b24f-2a530ca58494.webp?v=1786544229"},{"product_id":"bella-dining-chair-black-frame-jade-black-velvet","title":"Dining Chair Bella – Black Frame – Jade Black Velvet","description":"\u003cp\u003eUpholstered in Jade Black Matteo velvet, this Bella is a slim steel restaurant chair certified for contract use to EN 16139 Level 1. EN 1022 and EN 1728 cover stability, strength and durability, with certification by RISE, Sweden. The velvet is a 100% polyester weave rated at 130,000 Martindale, more than four times the commercial requirement, OEKO-TEX Standard 100 certified, water-repellent treated and covered for fire safety by EN 1021-1 and California TB 117. Load rating is 200 kg per seat.\u003c\/p\u003e\n\u003cp\u003eDeep velvet on a minimal frame brings texture to hotel restaurants and dinner-service dining rooms without adding visual weight, and because nothing ties the four legs together the chair pulls out silently and leaves the floor open for cleaning equipment. The padded backrest keeps guests comfortable through longer sittings. Any RAL powder-coat colour and upholstery in a customer's own material are available on request for project orders.\u003c\/p\u003e\n\u003cp\u003eBella is fully welded from raw Swedish steel at by Crea's own Malmö factory in Sweden, delivered assembled with a 10-year warranty, and this colourway is in stock with dispatch in 1 to 5 days. Dimensions suit 72 to 76 cm tables, spare parts stay available well past the purchase date, and project-volume quotations are available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Velvet","offer_id":53212082766190,"sku":"BELLA-GRP-BL-VELVET-JADEBLACK-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/bella-black-frame-jade-black-velvet-threequaterview-ecom-1_24b32333-3ef6-4139-80f5-28c8445a048f.webp?v=1786544233"},{"product_id":"bella-dining-chair-black-frame-sand-leather","title":"Dining Chair Bella – Black Frame – Sand Leather","description":"\u003cp\u003eBella in Sand vegan leather is a lightweight steel restaurant chair engineered for daily commercial service, certified to EN 16139 Level 1 for contract use together with EN 1022 and EN 1728, with testing by RISE in Sweden. Its Valencia upholstery is rated at 300,000 Martindale with the PERMABLOK3 finish and a 5-year fabric warranty, and fire performance is documented to EN 1021-1, EN 1021-2 and CRIB 5. Each seat takes a 200 kg load.\u003c\/p\u003e\n\u003cp\u003eThe warm neutral tone works with oak and stone tabletops alike, which lets one specification run across canteens and conference dining rooms in the same building. Chairs lift with one hand for daily reconfiguration, the padded seat and backrest remain comfortable over long sittings, and the fine-grained leather wipes down with a damp cloth. Frames can be powder-coated in any RAL colour on request, and customer's-own-material upholstery is offered for project orders.\u003c\/p\u003e\n\u003cp\u003eFully welded from raw Swedish steel in by Crea's own factory in Malmö, Sweden, every chair ships assembled under a 10-year warranty, and this version leaves stock in 1 to 5 days. It is proportioned for 72 to 76 cm dining tables, with spare parts held available long after sale. Project quotations are available for specified quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212082798958,"sku":"BELLA-GRP-BL-LEATHER-SAND-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/bella-black-frame-sand-leather-threequaterview-ecom-1_eda2d3e2-450c-4400-b05d-7974a4976ba1.webp?v=1786544233"},{"product_id":"bella-dining-chair-black-frame-black-bocule","title":"Dining Chair Bella – Black Frame – Black Bouclé","description":"\u003cp\u003eBella with seat and backrest in Black Dolly bouclé puts contract-certified engineering under a textured finish: the welded steel frame of this restaurant chair complies with EN 16139 Level 1 for contract use plus EN 1022 and EN 1728, certified by RISE, Sweden. The bouclé is a 100% polyester weave rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and tested to BS 8479, and the maximum load per seat is 200 kg.\u003c\/p\u003e\n\u003cp\u003eBlack-on-black with no rails between the legs keeps sightlines and floors clean in restaurant dining rooms, and the low weight makes nightly resets and under-table cleaning fast in canteens as well. The padded backrest keeps this slim chair comfortable through a full service. Any RAL powder-coat colour for the frame and upholstery in the customer's own material are available on request for project orders.\u003c\/p\u003e\n\u003cp\u003eLike the rest of the family, this Bella is fully welded from raw Swedish steel in by Crea's own Malmö factory in Sweden, arrives assembled, and is covered by a 10-year warranty; stocked units ship in 1 to 5 days. Sizing suits standard 72 to 76 cm tables, and spare parts remain stocked over the long term. Request a project quotation with your quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212083388782,"sku":"BELLA-GRP-BL-BOUCLE-BLACK-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/bella-black-frame-black-boucle-threequaterview-ecom-1_3d10a715-3832-4d2b-b091-3d2a6e6dd7fc.webp?v=1786544227"},{"product_id":"isabell-dining-chair-black-frame-jade-black-velvet","title":"Dining Chair Isabell – Black Frame – Jade Black Velvet","description":"\u003cp\u003eIsabell in Jade Black Matteo velvet is a fully upholstered restaurant chair on a welded steel frame, certified to EN 16139 Level 1 for contract use along with EN 1022 for stability and EN 1728 for strength and durability, tested by RISE in Sweden. The backrest is upholstered to full height, the seat is rated for 200 kg, and the velvet is a 100% polyester weave at 130,000 Martindale with a water-repellent finish and OEKO-TEX Standard 100 certification. Fire safety is covered by EN 1021-1 and California TB 117.\u003c\/p\u003e\u003cp\u003eThe full-height backrest suits restaurant dining rooms where guests settle in for long services, and the dark velvet holds its depth under low evening light. The tailored upholstery sits over a composite base that keeps its shape in daily commercial use, and seat height is matched to standard 72 to 76 cm tables. For project orders, the frame can be powder coated in any RAL colour and the chair upholstered in a customer's own material on request.\u003c\/p\u003e\u003cp\u003eIsabell is designed by Alexandra Pettersson and fully welded from raw Swedish steel in by Crea's own factory in Malmö. It arrives fully assembled, carries a 10-year warranty and stays repairable, with spare parts available long after purchase. This version ships in 1 to 5 days; request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Velvet","offer_id":53212083421550,"sku":"ISABELL-GRP-BL-VELVET-JADEBLACK-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/isabell-black-frame-jade-black-velvet-threequaterview-ecom-1_c2b936ff-e078-4807-b448-53bb358a4770.webp?v=1786544383"},{"product_id":"isabell-dining-chair-black-frame-sand-leather","title":"Dining Chair Isabell – Black Frame – Sand Leather","description":"\u003cp\u003eA warm sand vegan leather over a black welded steel frame makes this restaurant chair one of the lighter toned options in the Isabell family. The Valencia upholstery is rated at 300,000 Martindale, around ten times the requirement for commercial furniture, carries the PERMABLOK3 protective finish and a 5-year fabric warranty from Spradling, and meets EN 1021-1, EN 1021-2 and CRIB 5 for fire safety. The frame itself is certified to EN 16139 Level 1, EN 1022 and EN 1728 by RISE, Sweden.\u003c\/p\u003e\u003cp\u003eThe fine grained, wipeable surface suits hotel restaurants where turnover is high and cleaning happens between every service. A full-height upholstered backrest is fixed over a composite base that holds its shape, the seat is rated to 200 kg, and the chair fits standard tables of 72 to 76 cm. Any RAL frame colour and customer's own material upholstery are available on request for project orders.\u003c\/p\u003e\u003cp\u003eFully fully welded from raw Swedish steel in by Crea's Malmö factory to Alexandra Pettersson's design, Isabell arrives assembled and is covered by a 10-year warranty, with spare parts available long after purchase. Stock versions ship in 1 to 5 days. Project pricing is available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212084011374,"sku":"ISABELL-GRP-BL-LEATHER-SAND-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/isabell-black-frame-sand-leather-threequaterview-ecom-1_d477de54-71f2-4b3c-9b27-52de4b050409.webp?v=1786544384"},{"product_id":"isabell-dining-chair-black-frame-ivory-leather","title":"Dining Chair Isabell – Black Frame – Ivory Leather","description":"\u003cp\u003eIsabell in Ivory vegan leather sets pale upholstery against a black steel frame, a restaurant chair built for commercial use: certified to EN 16139 Level 1, with EN 1022 stability and EN 1728 strength testing by RISE in Sweden. The Valencia leather is rated at 300,000 Martindale with the PERMABLOK3 finish, backed by a 5-year fabric warranty from Spradling, and its fire safety covers EN 1021-1, EN 1021-2 and CRIB 5.\u003c\/p\u003e\u003cp\u003ePale seating in a commercial dining room depends on cleanability, and this surface wipes clean with a damp cloth, which makes the colour workable in canteens and conference dining as well as front of house. The backrest is upholstered to full height over a shape-holding composite base, the seat carries 200 kg, and the chair is sized for 72 to 76 cm tables. RAL frame colours and customer's own material upholstery are available on request for project orders.\u003c\/p\u003e\u003cp\u003eEach chair is fully welded from raw Swedish steel in by Crea's own Malmö factory, designed by Alexandra Pettersson, delivered fully assembled and covered by a 10-year warranty with long-term spare parts availability. Delivery for this version is 1 to 5 days. Request a quote for volume orders.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212084044142,"sku":"ISABELL-GRP-BL-LEATHER-IVORY-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/isabell-black-frame-ivory-leather-black-backrest-threequaterview-ecom-1_fb835ca1-2a77-4a9e-93ea-0e39274a5c54.webp?v=1786544379"},{"product_id":"isabell-dining-chair-black-frame-black-boucle","title":"Dining Chair Isabell – Black Frame – Black Bouclé","description":"\u003cp\u003eUpholstered from seat to shoulder in Black Dolly bouclé, this restaurant chair combines a textured weave with a welded steel frame certified for contract use: EN 16139 Level 1, EN 1022 and EN 1728, tested by RISE, Sweden. The bouclé is a 100% polyester weave rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and snag tested to BS 8479, and every seat is rated for a maximum load of 200 kg.\u003c\/p\u003e\u003cp\u003eBouclé brings textile depth to hotel restaurants and lounge dining settings where a softer textile surface is wanted alongside the leather and velvet options in the Isabell family. The full-height backrest supports guests through long sittings, the upholstery is tailored over a composite base that keeps its shape, and seat height matches standard 72 to 76 cm tables. For project orders, any RAL powder coat frame colour and customer's own material upholstery can be arranged on request.\u003c\/p\u003e\u003cp\u003eIsabell is designed by Alexandra Pettersson and fully welded from raw Swedish steel in by Crea's factory in Malmö. Chairs arrive fully assembled, carry a 10-year warranty and remain repairable, with spare parts held available long after purchase. This version ships in 1 to 5 days; project quantities can be quoted on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212084076910,"sku":"ISABELL-GRP-BL-BOUCLE-BLACK-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/isabell-black-frame-black-boucle-threequaterview-ecom-1_152eadd7-8883-465c-85f8-1dc831dcd736.webp?v=1786544378"},{"product_id":"karin-dining-chair-dark-oak","title":"Oak Dining Chair Karin – Dark Oak – Wood Seat","description":"\u003cp\u003eKarin is a solid oak restaurant chair with a sculpted two-piece seat and a rounded backrest, shown here in Dark Oak with a full wood seat. It is made from A-grade, FSC-certified German oak and rated for a 200 kg maximum load. The tobacco-brown tone comes from an Osmo oil-based stain, certified to EN 71.3 and resistant to saliva and perspiration to DIN 53160, sealed under a natural matte lacquer.\u003c\/p\u003e\n\u003cp\u003eThe all-wood construction suits high-turnover restaurant dining rooms: there is no upholstery to soil, cleaning is nothing more than a wipe with a damp cloth, and the stain deepens the grain rather than masking it. For project orders, upholstered seat versions in customer's own material are available on request, while wood finishes are limited to the listed stains, with no custom colour matching on wood.\u003c\/p\u003e\n\u003cp\u003eEvery chair is handcrafted in by Crea's own factory in Malmö, Sweden, ships fully assembled and is covered by a ten-year warranty, with spare parts held long after delivery. It is made to order on a 20 to 25 day lead time and sized for tables of 72 to 76 cm. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212084666734,"sku":"KARIN-GRP-DARKOAK-SIMP","price":4476.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/karin-darkoak-threequarter-ecom.webp?v=1786544389"},{"product_id":"karin-dining-chair-oak-ivory-boucle","title":"Oak Dining Chair Karin – Oak – Ivory Bouclé","description":"\u003cp\u003eA restaurant chair in pale natural oak with the seat upholstered in Ivory Dolly bouclé, Karin combines a solid FSC-certified German oak frame with a polyester fabric rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and claw-safe tested to BS 8479. Each chair carries a 200 kg maximum load, and the oak is sealed with a natural matte lacquer.\u003c\/p\u003e\n\u003cp\u003eThe 50,000 Martindale rating places the seat comfortably in contract territory for daily-use canteens and conference dining, while the light palette keeps larger rooms from feeling heavy. The bouclé is upholstered over a plywood core in the same sculpted two-piece profile as the wood seat. Customer's own material upholstery is available on request for project orders; wood finishes are limited to the listed stains.\u003c\/p\u003e\n\u003cp\u003eKarin is designed by Alexandra Pettersson and built in by Crea's own factory in Malmö, Sweden, arriving fully assembled with a ten-year warranty and long-term spare-parts support. Lead time is 18 to 20 days, made to order, and the chair is sized for tables of 72 to 76 cm. Volume pricing is available; request a project quote.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212084699502,"sku":"KARIN-GRP-OAK-BOUCLE-IVORY-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/karin_chair_front_oak_ivory_boucle_indoor_09307d34-1ff6-4f10-b752-d3acde89d800.webp?v=1786544396"},{"product_id":"karin-dining-chair-dark-oak-ivory-boucle","title":"Oak Dining Chair Karin – Dark Oak – Ivory Bouclé","description":"\u003cp\u003eKarin in Dark Oak with an Ivory Dolly bouclé seat is the highest-contrast version of this solid oak restaurant chair: a tobacco-brown, Osmo-stained frame of FSC-certified German oak under a bright upholstered seat. The stain is certified to EN 71.3 and resistant to DIN 53160, the bouclé is rated at 50,000 Martindale with OEKO-TEX Standard 100 certification, and the chair carries a 200 kg maximum load.\u003c\/p\u003e\n\u003cp\u003eThe contrast reads clearly across a full dining room, which makes this version useful where the interior scheme leans on warm wood tones and needs a lift. Claw-safe testing to BS 8479 confirms the weave's resistance to snagging and abrasion in daily service. For project orders, upholstery in customer's own material is available on request; wood finishes stay within the listed stain programme.\u003c\/p\u003e\n\u003cp\u003eManufactured at by Crea's own factory in Malmö, Sweden, and delivered fully assembled, each chair is covered by a ten-year warranty with spare parts stocked well beyond it. It is made to order in 20 to 25 days and matched to dining tables of 72 to 76 cm. For larger specifications, ask us for a project quotation.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212084732270,"sku":"KARIN-GRP-DARKOAK-BOUCLE-IVORY-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/karin-chair-darkoak-ivory-boucle-cushion-threequarter-ecom.webp?v=1786544393"},{"product_id":"karin-dining-chair-dark-oak-greige-boucle","title":"Oak Dining Chair Karin – Dark Oak – Greige Bouclé","description":"\u003cp\u003eThis version of the Karin restaurant chair pairs a Dark Oak frame with a Greige Dolly bouclé seat: two muted tones on a solid, FSC-certified German oak structure rated for a 200 kg load. The tobacco-brown finish is an Osmo oil-based stain, EN 71.3 certified and DIN 53160 resistant, sealed with a matte lacquer, and the seat fabric is a polyester bouclé rated at 50,000 Martindale.\u003c\/p\u003e\n\u003cp\u003eGreige on dark oak is deliberately recessive, a sound choice for canteens and staff dining where the furniture should organise the room rather than dominate it. The seat is upholstered over a plywood core in the sculpted two-piece shape, with OEKO-TEX Standard 100 certification and BS 8479 claw-safe testing behind it. Customer's own material upholstery for project orders is available on request; wood stains are limited to the listed finishes.\u003c\/p\u003e\n\u003cp\u003eby Crea builds every Karin in its own factory in Malmö, Sweden, and ships it fully assembled under a ten-year warranty, with spare parts available long after purchase. Lead time is 20 to 25 days, made to order, for tables of 72 to 76 cm. Project quantities are quoted on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212085322094,"sku":"KARIN-GRP-DARKOAK-BOUCLE-GREIGE-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/karin-chair-darkoak-greige-boucle-cushion-threequarter-ecom.webp?v=1786544392"},{"product_id":"karin-dining-chair-oak-greige-boucle","title":"Oak Dining Chair Karin – Oak – Greige Bouclé","description":"\u003cp\u003eIn natural oak with a Greige Dolly bouclé seat, Karin is a restaurant chair that sits between the honey tones of its solid FSC-certified German oak frame and cooler grey interiors. The frame carries a 200 kg rated load, the matte lacquer keeps the wood's natural feel, and the seat fabric is a 50,000 Martindale polyester bouclé, OEKO-TEX Standard 100 certified.\u003c\/p\u003e\n\u003cp\u003eThat neutrality makes it the easiest Karin to specify across mixed schemes, from conference dining to all-day restaurant service. The upholstered seat follows the same sculpted two-piece profile as the wood version, built over a plywood core, and BS 8479 claw-safe testing confirms the weave's resilience under daily use. Customer's own material is available on request for project orders; wood finishes are restricted to the listed stains.\u003c\/p\u003e\n\u003cp\u003eHandcrafted in Malmö, Sweden, in by Crea's own factory, Karin arrives fully assembled, carries a ten-year warranty and remains repairable, with spare parts held in stock long after purchase. It is made to order on an 18 to 20 day lead time and sized for tables of 72 to 76 cm. Contact us to price project volumes.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212085387630,"sku":"KARIN-GRP-OAK-BOUCLE-GREIGE-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/karin-chair-oak-greige-boucle-cushion-threequarter-ecom.webp?v=1786544395"},{"product_id":"karin-dining-chair-black-oak-black-boucle","title":"Oak Dining Chair Karin – Black Oak – Black Bouclé","description":"\u003cp\u003eKarin in Black Oak with a Black Dolly bouclé seat is a monochrome restaurant chair in solid FSC-certified German oak, stained black with the grain left visible and sealed under a natural matte lacquer. It is rated for a 200 kg maximum load, and the seat fabric reaches 50,000 Martindale with OEKO-TEX Standard 100 certification and BS 8479 claw-safe testing.\u003c\/p\u003e\n\u003cp\u003eAll-black furniture hides wear well, which counts in restaurant dining rooms with long service hours, and the depth of the stained grain keeps the chair from reading flat. The bouclé seat is built over a plywood core in the sculpted two-piece form. Upholstery in customer's own material can be specified on request for project orders, while wood finishes remain limited to the listed stains.\u003c\/p\u003e\n\u003cp\u003eEach chair is made in by Crea's own factory in Malmö, Sweden, delivered fully assembled and warranted for ten years, with spare-parts support that outlasts the warranty itself. Production is to order, with a 20 to 25 day lead time, sized for tables of 72 to 76 cm. We quote project quantities on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212085977454,"sku":"KARIN-GRP-BLACKOAK-BOUCLE-BLACK-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/karin_chair_front_blackoak_black_boucle_indoor_b1d27c84-76ad-46cb-8e08-283a0706c93e.webp?v=1786544388"},{"product_id":"erik-dining-chair-dark-oak","title":"Oak Dining Chair Erik – Dark Oak – Wood Seat","description":"\u003cp\u003eErik in Dark Oak is a solid oak restaurant chair with armrests, a full backrest and a sculpted two-piece wooden seat, built from FSC-certified A-grade German oak and rated for a maximum load of 200 kg. Its tobacco-brown tone comes from an Osmo natural oil-based stain, certified to EN 71.3 and resistant to saliva and perspiration according to DIN 53160, sealed under a natural matte lacquer.\u003c\/p\u003e\n\u003cp\u003eWith no upholstery to maintain, this version suits restaurant dining rooms and canteens where seating is cleaned daily; a damp cloth is the entire care routine. The armrests support longer sittings in conference dining, and the warm brown finish integrates cleanly into wood-focused interior schemes. Wood finishes are limited to the listed stains, so custom colours are not offered, while sibling models in the family add an upholstered Dolly bouclé seat where a project calls for fabric.\u003c\/p\u003e\n\u003cp\u003eEvery Erik is designed by Alexandra Pettersson and made to order in by Crea's own factory in Malmö, Sweden, arriving fully assembled after a 20 to 25 day lead time. The chair is covered by a 10-year warranty and matched to standard dining tables of 72 to 76 cm, with spare parts available long after delivery to keep repair ahead of replacement. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212086010222,"sku":"ERIK-GRP-DARKOAK-SIMP","price":4556.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/erik_chair_front_darkoak_indoor_92e7f8c3-7d6a-4d90-bada-f8aa5d604000.webp?v=1786544308"},{"product_id":"erik-dining-chair-dark-oak-ivory-boucle","title":"Oak Dining Chair Erik – Dark Oak – Ivory Bouclé","description":"\u003cp\u003ePairing a Dark Oak frame with an Ivory Dolly bouclé seat, this Erik is an upholstered oak restaurant chair with armrests, handcrafted from FSC-certified A-grade German oak. The bouclé is a 100% polyester weave rated at 50,000 Martindale and certified to OEKO-TEX Standard 100, fitted over a plywood core that keeps the sculpted two-piece seat shape, and the frame carries a 200 kg load rating. The Osmo oil-based stain, certified to EN 71.3, is sealed with a matte lacquer.\u003c\/p\u003e\n\u003cp\u003eThe contrast between dark frame and pale seat gives a clearly defined chair profile for restaurant dining rooms where the seating needs to stand out against the interior. In conference dining, the armrests earn their keep across long sessions. For project orders, upholstery in a customer's own material is available on request; wood finishes stay limited to the three listed stains, with no custom staining.\u003c\/p\u003e\n\u003cp\u003eProduction runs in by Crea's own Malmö factory in Sweden, made to order with fully assembled delivery in 20 to 25 days and a 10-year warranty. The chair is dimensioned for 72 to 76 cm table heights, and spare parts are stocked well beyond the original order date. Volume pricing for projects is available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212086075758,"sku":"ERIK-GRP-DARKOAK-BOUCLE-IVORY-SIMP","price":4396.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/erik_chair_front_darkoak_ivory_boucle_indoor_d7a2bfb3-a5b2-4bb2-96b2-ed95f8486993.webp?v=1786544311"},{"product_id":"erik-dining-chair-oak-ivory-boucle","title":"Oak Dining Chair Erik – Oak – Ivory Bouclé","description":"\u003cp\u003eThe lightest colourway in the family combines a natural oak frame with an Ivory Dolly bouclé seat: a solid oak restaurant chair with armrests, made from FSC-certified A-grade German oak and finished with a natural matte lacquer. The seat fabric is a 100% polyester bouclé rated at 50,000 Martindale with OEKO-TEX Standard 100 certification, upholstered over a plywood core, and the chair is rated for loads up to 200 kg.\u003c\/p\u003e\n\u003cp\u003ePale oak and pale upholstery support light interior palettes in canteens and daylight-heavy restaurant dining rooms built around lighter woods. The armrest and backrest geometry supports guests through extended conference dining as well. Customer's-own-material upholstery can be specified on request for project orders, while frame finishes remain limited to the listed stains.\u003c\/p\u003e\n\u003cp\u003eEach chair is built to order by by Crea in its own Malmö factory in Sweden and ships fully assembled in 18 to 20 days, covered by a 10-year warranty. It is sized for standard 72 to 76 cm dining tables, and spare parts continue to be supplied long after purchase. For project quantities, ask us for a quotation.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212086665582,"sku":"ERIK-GRP-OAK-BOUCLE-IVORY-SIMP","price":4396.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/erik_chair_front_oak_ivory_boucle_indoor_7990c3ed-4fbd-46bd-a61a-21928933e394.webp?v=1786544315"},{"product_id":"erik-dining-chair-oak-greige-boucle","title":"Oak Dining Chair Erik – Oak – Greige Bouclé","description":"\u003cp\u003eErik in natural oak with a Greige Dolly bouclé seat is an oak restaurant chair with armrests that bridges warm and cool interior palettes. The frame is solid FSC-certified A-grade German oak sealed with a natural matte lacquer, the seat is a 50,000 Martindale polyester bouclé certified to OEKO-TEX Standard 100 and built over a plywood core, and every chair is rated for a 200 kg load.\u003c\/p\u003e\n\u003cp\u003eGreige upholstery allows a single chair specification across mixed schemes, from oak-panelled restaurant dining rooms to more neutral conference dining floors, and the sculpted two-piece seat is shaped for sittings that run past the hour. On project orders, upholstery in the customer's own material is available on request; the wood finish options are fixed to the listed stains.\u003c\/p\u003e\n\u003cp\u003eby Crea manufactures Erik to order in its own factory in Malmö, Sweden, with fully assembled delivery in 18 to 20 days and a 10-year warranty on every chair. Proportions match dining tables of 72 to 76 cm, spare parts remain in supply for the long term, and repairability is part of the construction. Quotations for project volumes are available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212086698350,"sku":"ERIK-GRP-OAK-BOUCLE-GREIGE-SIMP","price":4396.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/erik_chair_front_oak_greige_boucle_indoor_ed7ae798-86c8-4fc0-840c-19247a6841d4.webp?v=1786544313"},{"product_id":"erik-dining-chair-black-oak-black-boucle","title":"Oak Dining Chair Erik – Black Oak – Black Bouclé","description":"\u003cp\u003eIn Black Oak with a Black Dolly bouclé seat, Erik is the darkest execution of this solid oak restaurant chair with armrests. The black stain leaves the grain of the FSC-certified A-grade German oak visible beneath a natural matte lacquer, the bouclé seat is a 100% polyester weave rated at 50,000 Martindale and OEKO-TEX Standard 100 certified over a plywood core, and the chair carries a 200 kg maximum load.\u003c\/p\u003e\n\u003cp\u003eAn all-black chair that is still visibly wood suits restaurant dining rooms built on darker, warmer palettes, and holds its presence in conference dining without turning to metal or plastic seating. The armrests and sculpted two-piece seat keep guests comfortable through full-length dinners. Upholstery in a customer's own material can be arranged on request for project orders; wood finishes are limited to the three listed stains.\u003c\/p\u003e\n\u003cp\u003eErik is made to order at by Crea's own Malmö factory in Sweden and delivered fully assembled with a lead time of 20 to 25 days, backed by a 10-year warranty. Sized for 72 to 76 cm dining tables, it is designed for repair rather than replacement, with spare parts available years after purchase. Contact us for a project quotation.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212086731118,"sku":"ERIK-GRP-BLACKOAK-BOUCLE-BLACK-SIMP","price":4396.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/erik_chair_front_blackoak_black_boucle_indoor_c392f3b0-42d1-41a0-8b56-0450ed304109.webp?v=1786544307"},{"product_id":"erik-dining-chair-dark-oak-greige-boucle","title":"Oak Dining Chair Erik – Dark Oak – Greige Bouclé","description":"\u003cp\u003eThis Erik sets a Greige Dolly bouclé seat into a Dark Oak frame, a restaurant chair pairing that coordinates with both brown-based and grey-based schemes. It is handcrafted from solid FSC-certified A-grade German oak, stained with an Osmo natural oil-based stain certified to EN 71.3 and resistant to saliva and perspiration per DIN 53160, then sealed in matte lacquer. The 50,000 Martindale bouclé is OEKO-TEX Standard 100 certified over a plywood core, and the load rating is 200 kg.\u003c\/p\u003e\n\u003cp\u003eDeep brown wood with soft grey upholstery gives a long-term colour combination for restaurant dining rooms where textiles are not updated often, and the same restraint fits canteen and conference dining fit-outs. Armrests and the sculpted two-piece seat carry longer sittings comfortably. Project orders can specify customer's-own-material upholstery on request; the wood finish range stays within the listed stains.\u003c\/p\u003e\n\u003cp\u003eManufacturing is in-house at by Crea in Malmö, Sweden, each chair made to order and shipped fully assembled within 20 to 25 days under a 10-year warranty. Seat geometry matches standard 72 to 76 cm tables, and long-term spare-parts availability keeps chairs in service rather than in storage. We will quote project quantities on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212087320942,"sku":"ERIK-GRP-DARKOAK-BOUCLE-GREIGE-SIMP","price":4396.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/erik_chair_front_darkoak_greige_boucle_indoor_0d5b5960-cbcb-4e81-b8b9-e358e8f0f7b5.webp?v=1786544310"},{"product_id":"kent-armchair-black-frame-jade-black-velvet","title":"Armchair Kent – Black Frame – Jade Black Velvet","description":"\u003cp\u003eKent in Jade Black Matteo velvet is a commercial lounge armchair with a deep seat and full-height back cushions on a welded black steel frame. The velvet is a 100% polyester weave rated at 130,000 Martindale, more than four times the requirement for commercial furniture, OEKO-TEX Standard 100 certified and finished with a water-repellent treatment, with fire safety covered by EN 1021-1 and California TB 117. The frame is certified by RISE, Sweden to EN 16139 Level 2 for heavy contract use, tested to EN 1022 for stability and EN 1728 for strength, and rated for a 200 kg load.\u003c\/p\u003e\n\u003cp\u003eIn hotel lobbies and lounge seating the velvet reads differently through the day as the light changes, while the open frame keeps a generous armchair from crowding the floor plan. The water-repellent finish and dense weave keep maintenance realistic in serviced spaces. For project orders, the frame can be powder-coated in any RAL colour and the cushions upholstered in customer's own material on request.\u003c\/p\u003e\n\u003cp\u003eKent is designed by Alexandra Pettersson and fully welded from raw Swedish steel in by Crea's own factory in Malmö, Sweden. It arrives fully assembled, carries a 10-year warranty and remains repairable, with spare parts available long after purchase. This version ships in 1 to 5 days. Request a quote for project volumes.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Velvet","offer_id":53212087910766,"sku":"KENT-GRP-BL-VELVET-JADEBLACK-SIMP","price":4796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/kent-black-steelframe-black-velvet-threequaterview-ecom-1_ca729d8a-7405-4351-9028-ae5fdf7bea71.webp?v=1786544409"},{"product_id":"kent-armchair-black-frame-ivory-leather","title":"Armchair Kent – Black Frame – Ivory Leather","description":"\u003cp\u003eKent in Ivory vegan leather is a commercial lounge armchair that puts pale, wipeable cushions inside an open black steel frame. The Valencia vegan leather is rated at 300,000 Martindale, around ten times the commercial furniture requirement, protected by the PERMABLOK3 finish and covered by a 5-year fabric warranty from Spradling; fire safety meets EN 1021-1, EN 1021-2 and CRIB 5. RISE, Sweden certifies the welded frame for intensive commercial use under EN 16139 Level 2, EN 1022 and EN 1728.\u003c\/p\u003e\n\u003cp\u003eReception areas are where light upholstery is often ruled out. Here the fine-grained leather wipes clean with a damp cloth and the protective finish is built for high-traffic use, so a front-of-house palette can stay bright. The deep seat and full-height back cushions hold visitors comfortably through longer stays, and the 200 kg rating covers daily public use. Any RAL frame colour and customer's own material upholstery are available on request for project orders.\u003c\/p\u003e\n\u003cp\u003eDesigned by Alexandra Pettersson, Kent is welded from raw Swedish steel at by Crea's factory in Malmö and delivered fully assembled. The warranty runs ten years and spare parts remain available long after purchase. Stock versions ship in 1 to 5 days. Ask for a project quotation with your quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212087943534,"sku":"KENT-GRP-BL-LEATHER-IVORY-SIMP","price":4796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/kent-black-steelframe-ivory-leather-threequaterview-ecom-1_8838c227-4003-4fed-96a0-f44c2592b815.webp?v=1786544406"},{"product_id":"kent-armchair-black-frame-ivory-boucle","title":"Armchair Kent – Black Frame – Ivory Bouclé","description":"\u003cp\u003eKent in Ivory Dolly bouclé is a commercial lounge armchair that sets bright looped-texture cushions inside a thin welded black steel frame. The bouclé is a 100% polyester weave rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and tested to BS 8479 for claw resistance. The frame holds certification from RISE, Sweden for intensive commercial use, complying with EN 16139 Level 2 for heavy contract environments along with EN 1022 for stability and EN 1728 for strength and durability, and each seat is rated to 200 kg.\u003c\/p\u003e\n\u003cp\u003eThe contrast between pale cushions and dark frame makes it a natural anchor for hotel lobbies and boutique reception seating, where a single chair often has to hold a corner visually. The deep seat and full-height back cushions support extended sitting, and the steel frame needs only a damp cloth. Project orders can be specified with any RAL powder-coat frame colour and upholstery in customer's own material, both on request.\u003c\/p\u003e\n\u003cp\u003eEvery Kent is an Alexandra Pettersson design, fully welded from raw Swedish steel in the by Crea factory in Malmö, Sweden, and shipped fully assembled. It is covered by a 10-year warranty with long-term spare parts availability. Lead time for this version is 1 to 5 days. Contact us to price project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212087976302,"sku":"KENT-GRP-BL-BOUCLE-IVORY-SIMP","price":4796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/kent-black-steelframe-ivory-boucle-threequaterview-ecom-1_b1729401-e60c-4c36-b0b4-d5cd75f541a0.webp?v=1786544405"},{"product_id":"kent-armchair-black-frame-black-boucle","title":"Armchair Kent – Black Frame – Black Bouclé","description":"\u003cp\u003eKent in Black Dolly bouclé pairs an all-black textile with an open steel frame, a commercial lounge armchair that reads architectural while offering a deep, cushioned seat. The Dolly bouclé is 100% polyester at 50,000 Martindale, certified to OEKO-TEX Standard 100 and tested under BS 8479 for claw resistance. The welded frame complies with EN 16139 Level 2, the European standard for heavy contract use, with stability to EN 1022 and strength and durability to EN 1728, certified by RISE, Sweden; the load rating is 200 kg per seat.\u003c\/p\u003e\n\u003cp\u003eIn office lounges and breakout areas the full-height back cushions give staff a genuine change of posture from task seating, while the dark colourway suits interiors where seating should recede visually. The open frame keeps sightlines clear in open-plan settings and lifts easily when layouts change. For project work, any RAL powder-coat colour for the frame and customer's own material for the cushions are available on request.\u003c\/p\u003e\n\u003cp\u003eKent is welded from raw Swedish steel to Alexandra Pettersson's design in by Crea's own Malmö factory and arrives fully assembled. A 10-year warranty applies and spare parts stay available well beyond purchase. This colourway ships in 1 to 5 days. We can quote directly for project volumes.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212088566126,"sku":"KENT-GRP-BL-BOUCLE-BLACK-SIMP","price":4796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/kent-black-steelframe-black-boucle-threequaterview-ecom-1_1a15c10d-fd08-42df-b384-ae56520d7363.webp?v=1786544402"},{"product_id":"kent-armchair-black-frame-greige-boucle","title":"Armchair Kent – Black Frame – Greige Bouclé","description":"\u003cp\u003eKent in Greige Dolly bouclé is a commercial lounge armchair with a deep seat and full-height back cushions, its grey-beige textile framed in welded black steel. The bouclé is a 100% polyester weave at 50,000 Martindale, OEKO-TEX Standard 100 certified and tested to BS 8479 for claw resistance, while the frame is certified for intensive commercial use by RISE, Sweden: EN 16139 Level 2 for heavy contract use, EN 1022 for stability and EN 1728 for strength and durability. Each seat is rated to 200 kg.\u003c\/p\u003e\n\u003cp\u003eThe neutral colourway settles into waiting areas and shared spaces without dictating the palette, and the cushion depth makes longer waits comfortable rather than tolerated. The exposed frame wipes down with a damp cloth, keeping housekeeping simple in public-facing rooms. On project orders, frames are available in any RAL powder-coat colour and cushions in customer's own material, on request.\u003c\/p\u003e\n\u003cp\u003eLike all by Crea originals, Kent is designed by Alexandra Pettersson and fully welded from raw Swedish steel in the company's own factory in Malmö, Sweden. Delivery is fully assembled, the warranty is ten years and spare parts availability is long term. This version has a 1 to 5 day lead time. Project pricing is available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212088598894,"sku":"KENT-GRP-BL-BOUCLE-GREIGE-SIMP","price":4796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/kent-black-steelframe-greige-boucle-threequaterview-ecom-1_99a31432-5065-4660-b6f7-c49d79946b96.webp?v=1786544403"},{"product_id":"einar-black-oak-jade-black-leather","title":"Armchair Einar – Black Oak – Jade Black Leather","description":"\u003cp\u003eEinar is a commercial lounge armchair in solid A-grade German oak, FSC certified, shown here with a Black Oak frame and Jade Black Valencia vegan leather. The upholstery is rated at 300,000 Martindale, around ten times the requirement for commercial furniture, carries the PERMABLOK3 protective finish and a 5-year fabric warranty from Spradling, and meets EN 1021-1, EN 1021-2 and CRIB 5, the British contract fire safety requirement. The deep seat and full-height back cushions are rated for a 200 kg load.\u003c\/p\u003e\n\u003cp\u003eThe dark frame and wipe-clean leather suit hotel lobbies and bar lounges where seating is in constant use and housekeeping time is short; the black stain is sealed with a natural matte lacquer that leaves the oak grain visible. For project orders, customer's own material upholstery is available on request, while the frame is offered in the three listed finishes: Oak, Dark Oak and Black Oak.\u003c\/p\u003e\n\u003cp\u003eEvery Einar is made to order in by Crea's own factory in Malmö, Sweden, and delivered fully assembled in 20 to 25 days. A 10-year warranty applies, and spare parts remain available long after delivery so chairs can be repaired rather than replaced. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212088631662,"sku":"EINAR-GRP-BLACKOAK-LEATHER-JADEBLACK-SIMP","price":5996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/einar-blackoak-black-leather-threequaterview-ecom-1_5250ed24-8435-475b-800d-7687a51e3922.webp?v=1786544299"},{"product_id":"einar-dark-oak-ivory-boucle","title":"Armchair Einar – Dark Oak – Ivory Bouclé","description":"\u003cp\u003eEinar in Dark Oak with Ivory Dolly bouclé is a commercial lounge armchair that sets bright upholstery against a tobacco-brown frame of solid FSC-certified A-grade German oak. The stain is an Osmo natural oil-based product, certified to EN 71.3 and resistant to saliva and perspiration to DIN 53160, sealed under a natural matte lacquer. The bouclé, a 100% polyester weave, is rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and claw-safe tested to BS 8479, and each seat carries a 200 kg rating.\u003c\/p\u003e\n\u003cp\u003eHigh contrast makes this version a natural anchor for reception areas and hotel lounges where one key piece sets the palette, while the deep seat and full-height back cushions keep longer waits comfortable. Customer's own material upholstery can be specified on request for project orders; wood finishes are limited to the listed Oak, Dark Oak and Black Oak.\u003c\/p\u003e\n\u003cp\u003eEach chair is built in by Crea's own Malmö factory in Sweden and arrives fully assembled, made to order with a 20 to 25 day lead time. The warranty runs ten years, spare parts stay available, and volume pricing is a quote request away.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212089221486,"sku":"EINAR-GRP-DARKOAK-BOUCLE-IVORY-SIMP","price":5996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/einar-darkoak-ivory-boucle-threequaterview-ecom-1_1e636e63-ade8-4e5e-90bd-f6e87af92722.webp?v=1786544303"},{"product_id":"einar-oak-greige-boucle","title":"Armchair Einar – Oak – Greige Bouclé","description":"\u003cp\u003eA commercial lounge armchair in natural oak with Greige Dolly bouclé, Einar combines a solid FSC-certified A-grade German oak frame with a muted upholstery tone that works in most interior palettes. The frame is sealed with a natural matte lacquer, the polyester bouclé is rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and claw-safe tested to BS 8479, and the seat is rated for loads up to 200 kg.\u003c\/p\u003e\n\u003cp\u003eThe neutral pairing suits office lounges and breakout areas where furniture must blend across changing fit-outs; the deep seat and full-height back cushions support extended sitting, and the matte-lacquered frame is maintained with a damp cloth. For project orders, upholstery in customer's own material is available on request, with frame finishes limited to the listed Oak, Dark Oak and Black Oak.\u003c\/p\u003e\n\u003cp\u003eProduction takes place in by Crea's own factory in Malmö, Sweden; each armchair is made to order, ships fully assembled in 18 to 20 days, and is covered by a 10-year warranty with spare parts available long after purchase. Contact us for a project quotation.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212089254254,"sku":"EINAR-GRP-OAK-BOUCLE-GREIGE-SIMP","price":5996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/einar-oak-greige-boucle-threequaterview-ecom-1_a3309fd1-4431-4416-a593-6fb18a162345.webp?v=1786544305"},{"product_id":"einar-black-oak-black-boucle","title":"Armchair Einar – Black Oak – Black Bouclé","description":"\u003cp\u003eEinar in Black Oak with Black Dolly bouclé is a monochrome commercial lounge armchair built on a solid FSC-certified A-grade German oak frame, where the black stain leaves the grain visible under a natural matte lacquer. The looped polyester upholstery is rated at 50,000 Martindale, certified to OEKO-TEX Standard 100 and claw-safe tested to BS 8479, and every seat carries a maximum load rating of 200 kg.\u003c\/p\u003e\n\u003cp\u003eAn all-black specification reads calm in dim hospitality lighting, which makes this version well suited to hotel bars, lounges and waiting areas that run into the evening. The deep seat and full-height back cushions are designed for long occupancy rather than brief perching. Project orders can specify customer's own material upholstery on request; the wood is offered only in the listed finishes.\u003c\/p\u003e\n\u003cp\u003eBy Crea builds every Einar in its own Malmö factory in Sweden, delivering fully assembled with a made-to-order lead time of 20 to 25 days. Cover includes a 10-year warranty, and spare parts availability keeps repair ahead of replacement. Ask for a quote on project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212089844078,"sku":"EINAR-GRP-BLACKOAK-BOUCLE-BLACK-SIMP","price":5996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/einar-blackoak-black-boucle-threequaterview-ecom-1_2a28685f-7459-4784-a3df-183c51240b12.webp?v=1786544298"},{"product_id":"einar-dark-oak-greige-boucle","title":"Armchair Einar – Dark Oak – Greige Bouclé","description":"\u003cp\u003ePairing a Dark Oak frame with Greige Dolly bouclé, this commercial lounge armchair offers a particularly discreet specification within the Einar family. The solid A-grade German oak is FSC certified and takes its tobacco-brown tone from an Osmo natural oil-based stain, certified to EN 71.3 and DIN 53160, sealed with matte lacquer; the 100% polyester bouclé is rated at 50,000 Martindale, OEKO-TEX Standard 100 certified and claw-safe tested to BS 8479. Load rating is 200 kg per seat.\u003c\/p\u003e\n\u003cp\u003eThe low-contrast palette recedes into waiting areas and quiet reception zones where seating should support the room rather than dominate it, and the deep seat with full-height back cushions holds comfort through long appointments. Customer's own material upholstery is available on request for project orders, while frame colours remain limited to the three listed oak finishes.\u003c\/p\u003e\n\u003cp\u003eManufactured in by Crea's own factory in Malmö, Sweden, each chair is made to order, arrives fully assembled within 20 to 25 days and carries a 10-year warranty backed by long-term spare parts supply. Project quantity quotes are available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212089876846,"sku":"EINAR-GRP-DARKOAK-BOUCLE-GREIGE-SIMP","price":5996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/einar-darkoak-greige-boucle-threequaterview-ecom-1_fdfde52a-b9bc-4e41-91a5-8d127a9cd312.webp?v=1786544301"},{"product_id":"iris-bed-table-white-frame-white-leather-white-laminate","title":"Bedside Table Iris – White Frame – White Laminate Top","description":"\u003cp\u003eIris in all white is a rectangular hotel bedside table with a fully welded steel frame, vegan leather straps and a white laminate top, standing 64 cm tall to align with most standard beds. The straps are structural: they cradle the top and carry it on the frame, and the strap material is rated at 300,000 Martindale for abrasion resistance with a PERMABLOK3 finish for added stain resistance.\u003c\/p\u003e\u003cp\u003eIn a guest room the layout is practical: an open shelf under the top holds what a guest wants at hand, and the drawer keeps chargers and personal items out of sight. The laminate surface is wear resistant and wipes clean with a damp cloth, which suits housekeeping routines, and the all white finish stays visually light beside pale headboards. For project orders, the steel frame can be powder coated in any RAL colour on request.\u003c\/p\u003e\u003cp\u003eIris is designed by Alexandra Pettersson, welded from raw Swedish steel and finished in by Crea's own factory in Malmö, where every table is inspected by hand before shipping. The warranty runs ten years, and spare parts remain available long after purchase. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Dekton","offer_id":53212090499438,"sku":"IRIS-GRP-WH-WHITE-LEATHER-WHITE-WHITE-WHITE-SIMP","price":3196.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/iris_bedside_table_front_white_white_laminate_indoor_637962ba-de16-4c7e-a512-fe77470ba771.webp?v=1786544371"},{"product_id":"iris-bed-table-beige-frame-sand-leather-lunar-dekton","title":"Bedside Table Iris – Beige Frame – Lunar Stone Top","description":"\u003cp\u003eSpecified in beige with sand straps and a Lunar stone top, Iris is a hotel bedside table built on a fully welded steel frame, 64 cm tall, the height that meets most standard mattresses. Lunar is the palest of the Dekton sintered stone tops, an ultra compact mineral surface with high resistance to everyday scratches, heat and stains. The vegan leather straps that hold the top are rated at 300,000 Martindale and carry a PERMABLOK3 stain resistant finish.\u003c\/p\u003e\u003cp\u003eThe warm, low contrast palette suits serviced apartments and guest rooms designed around natural tones. Below the stone top sit an open shelf and a drawer, so bedside essentials stay ordered without cluttering the surface, and water glasses or warm cups leave no mark on the stone. Any RAL powder coat colour for the frame is available on request for project orders.\u003c\/p\u003e\u003cp\u003eEvery Iris is welded from raw Swedish steel and powder coated in by Crea's own factory in Malmö, Sweden, then checked by hand before it ships. Designed by Alexandra Pettersson, it carries a ten year warranty with long term spare parts availability. Request a quotation for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Dekton","offer_id":53212091089262,"sku":"IRIS-GRP-BE-ASH-LEATHER-SAND-LUNAR-STAINLESS-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/iris_bedside_table_front_beige_lunar_dekton_indoor_ba9cd25f-4ab0-4741-9c64-26e4ed3c9590.webp?v=1786544368"},{"product_id":"iris-bed-table-white-frame-ivory-leather-entzo-dekton","title":"Bedside Table Iris – White Frame – Entzo Stone Top","description":"\u003cp\u003eWith a warm, veined Entzo stone top over a white frame and ivory straps, this hotel bedside table version of Iris adds a mineral accent to light guest room interiors. The frame is fully welded steel, the table stands 64 cm tall to align with standard bed heights, and the Dekton sintered stone top resists everyday scratches, heat and stains. The load bearing straps are vegan leather rated at 300,000 Martindale with a PERMABLOK3 stain resistant finish.\u003c\/p\u003e\u003cp\u003eThe construction gives housekeeping little to manage: the stone surface withstands warm mugs and cosmetic spills, while the open shelf and drawer keep guest belongings sorted between turnovers. In boutique hotel rooms the white and ivory pairing reads airy without going clinical. Project orders can specify any RAL colour for the powder coated frame on request.\u003c\/p\u003e\u003cp\u003eDesigned by Alexandra Pettersson, Iris is welded from raw Swedish steel and finished in by Crea's own factory in Malmö, Sweden, with hand inspection before dispatch. A ten year warranty applies, and spare parts stay available long after purchase, so damaged tables are repaired rather than replaced. Quotes for project volumes are available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Dekton","offer_id":53212091122030,"sku":"IRIS-GRP-WH-WHITE-LEATHER-IVORY-ENTZO-STAINLESS-SIMP","price":4316.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/iris_bedside_table_front_white_entzo_dekton_indoor_52ede9bd-8e5d-4432-910c-a8794f0d4d5a.webp?v=1786544370"},{"product_id":"lisa-wall-shelf-black-frame-oak-sand-leather","title":"Floating Bedside Table Lisa – Black Frame – Dark Oak","description":"\u003cp\u003eLisa is a wall-mounted hotel bedside table with a fully welded, powder-coated black steel frame, a solid dark oak top and Jade Black vegan leather straps beneath it. The top is A-grade German oak, FSC-certified and sealed with a matte lacquer that protects the wood without hiding its grain, and the straps use the same Valencia material as by Crea's seating: 300,000 Martindale, PERMABLOK3 stain protection and a 5-year warranty from Spradling.\u003c\/p\u003e\n\u003cp\u003eScrewed directly to the wall with no legs, Lisa keeps the guest-room floor completely clear, so housekeeping can clean beneath it in one pass and compact rooms keep their full floor area. The straps hold magazines or a paperback within reach, and the dark oak top with black straps suits darker hotel schemes. For project orders, the frame can be powder-coated in any RAL colour and the straps made in customer's own material; oak finishes are limited to the listed options.\u003c\/p\u003e\n\u003cp\u003eEach table is welded from raw Swedish steel, finished in by Crea's own factory in Malmö and inspected by hand before dispatch. The 10-year warranty is backed by spare-part availability, and wall-fixing details are provided with full dimensions. Request a quote for guest-room quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212091154798,"sku":"LISA-GRP-BL-DARKOAK-LEATHER-JADEBLACK-SIMP","price":2636.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/lisa_wall_shelf_front_black_darkoak_black_indoor_eb67f995-7067-4b5c-bd26-5768fc4890f3.webp?v=1786544435"},{"product_id":"lisa-wall-shelf-black-frame-black-oak-chocolate-leather","title":"Floating Bedside Table Lisa – Black Frame – Black Oak – Chocolate Strap","description":"\u003cp\u003eThis version of the Lisa floating hotel bedside table combines a black stained oak top with Chocolate vegan leather straps on a fully welded black steel frame. The stain keeps the oak grain visible, the solid A-grade German oak is FSC-certified and matte lacquered, and the frame is welded from raw Swedish steel and powder-coated in by Crea's own factory. The Valencia straps are rated at 300,000 Martindale, finished with PERMABLOK3 and covered by a 5-year Spradling material warranty.\u003c\/p\u003e\n\u003cp\u003eWall fixing removes the floor footprint entirely: nothing stands under the shelf, cleaning is a single pass, and serviced-apartment and hotel guest rooms gain usable floor area beside the bed. The chocolate straps warm an otherwise monochrome specification, and the strap shelf keeps reading material off the top surface. Project orders can specify any RAL powder-coat colour for the frame or customer's own material for the straps; oak tops are supplied in the listed finishes only.\u003c\/p\u003e\n\u003cp\u003eLisa is designed by Alexandra Pettersson and made in Malmö, Sweden, with every table hand-inspected before shipping. The table is covered by a 10-year warranty with spare parts available long after purchase, and full dimensions with wall-fixing details accompany the product. Volume pricing for room programmes is available on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Laminate","offer_id":53212091744622,"sku":"LISA-GRP-BL-BLACKWOOD-LEATHER-CHOCOLATE-SIMP","price":2636.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/lisa_wall_shelf_front_black_blackoak_chocolate_indoor_94da3fd3-fd33-4368-b6b5-402ce18d338a.webp?v=1786544434"},{"product_id":"lisa-wall-shelf-black-frame-oak-sand-leather-1","title":"Floating Bedside Table Lisa – Black Frame – Oak","description":"\u003cp\u003eThe natural oak Lisa is a hotel bedside table that mounts flat to the wall: a welded black steel frame, a solid oak top sealed with a matte lacquer that needs no oiling, and two sand vegan leather straps hung beneath. The oak is A-grade German timber with FSC certification, and the straps share the Valencia upholstery used across by Crea seating, rated 300,000 Martindale with PERMABLOK3 stain resistance and a 5-year warranty from Spradling.\u003c\/p\u003e\n\u003cp\u003eThe pale top and sand straps fit light Scandinavian guest-room schemes, and because the table is screwed to the wall with no legs, vacuuming and mopping run straight underneath, a practical gain across a full floor of hotel rooms or serviced apartments. The under-shelf straps store magazines and paperbacks without cluttering the top. For project quantities, frames can be finished in any RAL colour and straps in customer's own material; wood finishes remain limited to the listed oak options.\u003c\/p\u003e\n\u003cp\u003eEvery Lisa is welded from raw Swedish steel, powder-coated and assembled in by Crea's factory in Malmö, then inspected by hand before dispatch. It ships with a 10-year warranty, spare parts remain available for repair, and wall-fixing details are included with full dimensions. Ask for a quote on multi-room orders.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Wood","offer_id":53212091777390,"sku":"LISA-GRP-BL-OAK-LEATHER-SAND-SIMP","price":2636.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/lisa_wall_shelf_front_black_oak_sand_indoor_bb828878-0890-465f-a5bc-8de0c5b86c5d.webp?v=1786544436"},{"product_id":"anton-bench-black-frame-ivory-boucle","title":"Upholstered Bench Anton – Black Frame – Ivory Bouclé","description":"\u003cp\u003eAnton is a commercial bench with a fully welded frame in raw Swedish steel, powder-coated black, and a seat cushion in Ivory Dolly bouclé. The seat is rated for a maximum load of 200 kg, and every frame is inspected by hand before it ships.\u003c\/p\u003e\u003cp\u003eIn reception areas the light cushion on the black frame gives a clear, welcoming seating point, and the bench belongs to the same square-profile series as the Anton coffee tables, useful when a lobby scheme calls for matching pieces. The bouclé is a 100% polyester weave rated 50,000 Martindale, OEKO-TEX Standard 100 certified and claw-safe tested to BS 8479. For project orders, the frame can be powder-coated in any RAL colour and the seat upholstered in customer's own material, both on request.\u003c\/p\u003e\u003cp\u003eAnton is designed by Alexandra Pettersson and welded in by Crea's own factory in Malmö, Sweden, arriving fully assembled. The warranty runs ten years, and spare parts remain available long after purchase, so repair stays the first option. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212091810158,"sku":"ANTONBENCH-GRP-BL-BOUCLE-IVORY-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_bench_front_black_ivory_boucle_indoor_03f2c680-9a91-49dc-81e1-9768ec224825.webp?v=1786544195"},{"product_id":"anton-bench-black-frame-jade-black-leather","title":"Upholstered Bench Anton – Black Frame – Jade Black Leather","description":"\u003cp\u003eAnton with a Jade Black vegan leather seat is a commercial bench on a fully welded raw Swedish steel frame, rated for a maximum seat load of 200 kg. The Valencia vegan leather is rated at 300,000 Martindale, around ten times the requirement for commercial furniture, carries the PERMABLOK3 protective finish and meets EN 1021-1, EN 1021-2 and CRIB 5 fire safety requirements.\u003c\/p\u003e\u003cp\u003eThose certifications make it a direct specification for hotel lobbies and other contract settings where fire compliance is a checklist item, and the wipe-clean surface handles the daily traffic of waiting and fitting areas. The upholstery additionally carries a 5-year fabric warranty from Spradling. Any RAL powder-coat colour for the frame and customer's own material upholstery are available on request for project orders.\u003c\/p\u003e\u003cp\u003eEvery bench is welded, powder-coated and hand-inspected in by Crea's own factory in Malmö, Sweden, to a design by Alexandra Pettersson, and delivered fully assembled. A ten year warranty applies, with spare parts available long after purchase. Contact us for volume pricing on project orders.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212092399982,"sku":"ANTONBENCH-GRP-BL-LEATHER-JADEBLACK-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_bench_front_black_black_leather_indoor_27c3296a-961b-4c32-8878-263d1259a758.webp?v=1786544196"},{"product_id":"anton-bench-black-frame-greige-boucle","title":"Upholstered Bench Anton – Black Frame – Greige Bouclé","description":"\u003cp\u003eAnton in Greige Dolly bouclé is a commercial bench built on a fully welded frame of raw Swedish steel, powder-coated in black and inspected by hand before dispatch, with a seat rated to a 200 kg maximum load.\u003c\/p\u003e\u003cp\u003eThe neutral cushion suits waiting areas where furniture has to work with an existing palette rather than compete with it, and the compact footprint places easily in reception schemes or beside the matching Anton coffee tables. The bouclé is 100% polyester, rated at 50,000 Martindale, certified to OEKO-TEX Standard 100 and claw-safe tested to BS 8479, a specification level suited to daily commercial use. Project orders can specify any RAL colour for the powder coat and customer's own material for the upholstery, both available on request.\u003c\/p\u003e\u003cp\u003eDesigned by Alexandra Pettersson, Anton is produced in by Crea's own factory in Malmö, Sweden, and ships fully assembled. The product warranty is ten years, backed by long-term spare parts availability, so individual components can be replaced rather than the whole bench. We quote for project volumes on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Default Title","offer_id":53212092432750,"sku":"ANTONBENCH-GRP-BL-BOUCLE-GREIGE-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_bench_front_black_griege_boucle_indoor_f47ad6b2-2c76-4640-9367-023ac34d391f.webp?v=1786544194"},{"product_id":"anton-bench-black-frame-black-boucle","title":"Upholstered Bench Anton – Black Frame – Black Bouclé","description":"\u003cp\u003eAnton with a Black Dolly bouclé cushion is a commercial bench built around a fully welded frame in raw Swedish steel, powder-coated black, with a seat rated for loads up to 200 kg and a hand inspection of every frame before shipping.\u003c\/p\u003e\u003cp\u003eThe all-black execution works in fitting areas and hotel lobbies where the furniture should stay visually quiet and let the interior scheme lead, while the looped bouclé adds texture that keeps the piece from reading flat. The fabric is a 100% polyester weave rated at 50,000 Martindale for abrasion resistance, OEKO-TEX Standard 100 certified and claw-safe tested to BS 8479. On request for project orders, the frame can be finished in any RAL colour and the cushion upholstered in customer's own material.\u003c\/p\u003e\u003cp\u003eAnton comes from by Crea's own factory in Malmö, Sweden, where each bench is welded to Alexandra Pettersson's design and arrives fully assembled. Warranty is ten years, with spare parts available well beyond it, so worn parts are replaced rather than the bench itself. Ask for a quotation when specifying project volumes.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Bouclé","offer_id":53212093022574,"sku":"ANTONBENCH-GRP-BL-BOUCLE-BLACK-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_bench_front_black_black_boucle_indoor_12838827-d51f-4bd6-82cd-a8b7bc2efb40.webp?v=1786544192"},{"product_id":"anton-bench-black-frame-latte-leather","title":"Upholstered Bench Anton – Black Frame – Latte Leather","description":"\u003cp\u003eAnton in Latte vegan leather is a commercial bench with a fully welded raw Swedish steel frame and a 200 kg maximum seat load. The Valencia upholstery is rated 300,000 Martindale, approximately ten times the commercial furniture requirement, protected by the PERMABLOK3 finish and certified to EN 1021-1 and EN 1021-2 for ignition resistance as well as CRIB 5, the British contract fire safety requirement.\u003c\/p\u003e\u003cp\u003eThe warm latte tone softens the black frame, making the bench an easy fit in hotel lobbies and reception areas, while the easy-clean leather surface is practical in fitting areas that see continuous use. Spradling backs the fabric with a 5-year warranty of its own. For project orders, any RAL powder-coat colour and customer's own material upholstery are both available on request.\u003c\/p\u003e\u003cp\u003eThe bench is designed by Alexandra Pettersson, welded and hand-inspected in by Crea's own factory in Malmö, Sweden, and delivered fully assembled with a ten year warranty. Spare parts remain available long after purchase, keeping repair viable across the product's service life. Volume pricing is available for project enquiries.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Vegan leather","offer_id":53212093055342,"sku":"ANTONBENCH-GRP-BL-LEATHER-LATTE-SIMP","price":3436.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_bench_front_black_latte_leather_indoor_31de517d-4e48-4cf1-93b5-a7ba9caba9c1.webp?v=1786544198"},{"product_id":"anton-coffee-table-large-set-black-frame-grafite-dekton","title":"Nesting Coffee Table Set Anton – Large Set – Black Frame – Grafite","description":"\u003cp\u003eWith near-black Grafite Dekton tops over fully welded black steel frames, this three-piece Anton set is the darkest commercial coffee table group in the series. It combines one large table and two identical medium tables in raw Swedish steel, closing to roughly half its spread footprint, with sintered-stone surfaces engineered for high resistance to scratches, heat and stains.\u003c\/p\u003e\n\u003cp\u003eThe monochrome palette suits hotel lobbies and lounges specified around darker materials, where the trio reads almost architectural whether gathered or dispersed. The two mediums move independently to wherever seating forms, and the set reassembles into a single block at close. For project orders the frames can be finished in any RAL powder-coat colour on request; other tops and compositions are configurable through Design Your Own.\u003c\/p\u003e\n\u003cp\u003eLike the rest of the series designed by Alexandra Pettersson, each table is welded from raw Swedish steel, powder-coated in by Crea's own factory in Malmö, Sweden, and hand-inspected before shipping. A ten-year warranty applies, with repair prioritised and spare parts stocked well beyond the warranty period. Project volumes are priced on request.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212093677934,"sku":"ANTON-GRP-LARGE-SET-BL-DEKGRAFITE-SIMP","price":15996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_coffee_table_front_black_grafite_dekton_indoor_1aa1607c-3711-49e7-9e77-44583fbfafde.webp?v=1786544204"},{"product_id":"anton-coffee-table-small-set-black-frame-grafite-dekton","title":"Nesting Coffee Table Set Anton – Small Set – Black Frame – Grafite","description":"\u003cp\u003eThis two-piece Anton set is a commercial coffee table pairing in full monochrome: near-black Grafite Dekton sintered stone on fully welded black frames of raw Swedish steel. The medium and small tables nest completely into one shared footprint, and the ultra-compact stone surface offers high resistance to scratches, heat and stains.\u003c\/p\u003e\n\u003cp\u003eNested, the pair reads as one sculptural block, which suits compact office lounges and breakout corners where floor space earns its keep; pulled apart, it serves two seating positions at once or forms an L around a sofa. The square steel profile matches every other piece in the Anton series. The frames are available in any RAL powder-coat colour on request for project orders, with additional tops and compositions offered in Design Your Own.\u003c\/p\u003e\n\u003cp\u003eProduction happens entirely in by Crea's own factory in Malmö, Sweden, from welding the raw Swedish steel to the final hand inspection before dispatch. The set carries a ten-year warranty, with spare parts held long after purchase and repair preferred to replacement. Contact us to quote project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212093743470,"sku":"ANTON-GRP-SMALL-SET-BL-DEKGRAFITE-SIMP","price":8796.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/anton_coffee_table_front_black_grafite_dekton_samllset_indoor_ac5925b2-d179-4817-9d9f-4a22ad533e45.webp?v=1786544209"},{"product_id":"leo-coffee-table-large-set-black-frame-grafite-dekton","title":"Nesting Coffee Table Set Leo – Large Set – Black Frame – Grafite","description":"\u003cp\u003eLeo is a commercial coffee table set of three nesting tables, built on fully welded black steel frames with tops of Grafite Dekton sintered stone. The Large set includes one table in each of the three Leo sizes, and because every frame stands at its own height, the round tops slide over one another with roughly 40 percent overlap instead of stacking away completely. Grafite is a near-black Dekton finish with high resistance to scratches, heat and stains.\u003c\/p\u003e\u003cp\u003eThat makes the set well suited to hotel lobbies and lounge floors where layouts change daily. Gathered, the three tables read as a single dark cluster; pulled apart, they serve three seating groups at once, and the Dekton tops stand up to cups, trays and hard cleaning routines without special care. For project orders, the steel frames can be powder-coated in any RAL colour on request.\u003c\/p\u003e\u003cp\u003eEvery Leo is welded from raw Swedish steel and powder-coated in our own factory in Malmö, Sweden, with each table inspected by hand before dispatch. The set carries a 10-year warranty, and spare parts remain available long after purchase. Request a quote for project quantities.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212094366062,"sku":"LEO-GRP-LARGESET-BL-DEKGRAFITE-SIMP","price":23996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/leo_coffee_table_front_black_grafite_dekton_largeset_indoor_a0ed67d9-99b7-4c56-8217-dca97fcb4be6.webp?v=1786544414"},{"product_id":"leo-coffee-table-large-set-black-frame-grigio-dekton","title":"Nesting Coffee Table Set Leo – Large Set – Black Frame – Grigio","description":"\u003cp\u003eThe Leo Large set in Grigio is a commercial coffee table trio for front-of-house spaces, pairing fully welded black steel frames with Dekton sintered-stone tops in a composed mid-grey. One table in each Leo size stands at its own height, so the round tops nest with an overlap of around 40 percent rather than disappearing beneath one another. Dekton is an ultra-compact mineral surface engineered to resist everyday scratches, heat and stains.\u003c\/p\u003e\u003cp\u003eIn reception and waiting areas the mid-grey stone sits calmly against pale floors and dark seating alike, and the three-table format lets staff reset the room in seconds: one gathered cluster for quiet hours, three separate tables when every seat is taken. Any RAL powder-coat colour for the frames is available on request for project orders.\u003c\/p\u003e\u003cp\u003eThe frames are welded from raw Swedish steel and finished in our own factory in Malmö, Sweden, and every table is checked by hand before it ships. A 10-year warranty applies, with spare parts obtainable long after purchase. For project quantities, request a quote.\u003c\/p\u003e","brand":"by Crea","offers":[{"title":"Large set","offer_id":53212094398830,"sku":"LEO-GRP-LARGESET-BL-DEKGRIGIO-SIMP","price":23996.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/1517\/3998\/files\/leo_coffee_table_front_black_grigio_dekton_largeset_indoor_e0f7a0bf-71ba-4474-b921-7c59297e021d.webp?v=1786544416"}],"url":"https:\/\/b2b.by-crea.com\/collections\/indoor-furniture.oembed","provider":"by Crea B2B","version":"1.0","type":"link"}